안녕하세요,
제조사에서 별도의 데이터 시트는 제공하지 않습니다만 아래의 추가적인 사항만 참조하시기 바랍니다.
* 2선식
1. The main technical parameters
Platinum resistance
Graduation number Pt100
Temperature measurement range -5~170℃
Allowable deviation Class A ±(0.15+0.002∣t∣) ℃
Class B ±(0.30+0.005∣t∣) ℃
2.. Thermal response time
The thermal response time is the time required when the output change value of the thermal resistance is equivalent to 50% of the step change under the action of the step temperature, expressed by τ0.5.
Thermal resistance thermal response time reference value
Diameter(mm) Φ3 Φ4 Φ5 Φ6 Φ8
τ0.5(seconds) ≤3 ≤5 ≤8 ≤12 ≤18
Note: When the armored element and the outer protective tube form an armored thermal resistance complete machine with a sheath, since the diameter and wall thickness of the protective tube are much larger than the armored sheath, the thermal response time mainly depends on the dynamic response of the protective tube
3. Room temperature insulation resistance
The thermal resistance is at an ambient temperature of 15-35°C, the relative humidity is not more than 80%, and the test voltage is 10-100V (DC). The insulation resistance between the electrode and the outer casing is >100MΩ
Insulation resistance:
Normal temperature≥2000MΩ
High temperature (500℃)≥300MΩ
Type of structure of the measuring end
4. Protection tube material
Generally 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti
5. Product performance standards
International: IEC751-1:1983
* 3선식
1. The main technical parameters
Platinum resistance
Graduation number Pt100
Temperature measurement range -70-200℃
2. Thermal response time
The thermal response time is the time required when the output change value of the thermal resistance is equivalent to 50% of the step change under the action of the step temperature, expressed by τ0.5.
Thermal resistance thermal response time reference value
Diameter(mm) Φ3 Φ4 Φ5 Φ6 Φ8
τ0.5(seconds) ≤3 ≤5 ≤8 ≤12 ≤18
Note: When the armored element and the outer protective tube form an armored thermal resistance complete machine with a sheath, since the diameter and wall thickness of the protective tube are much larger than the armored sheath, the thermal response time mainly depends on the dynamic response of the protective tube
3. Room temperature insulation resistance
The thermal resistance is at an ambient temperature of 15-35°C, the relative humidity is not more than 80%, and the test voltage is 10-100V (DC). The insulation resistance between the electrode and the outer casing is >100MΩ
Insulation resistance:
Normal temperature≥2000MΩ
High temperature (500℃)≥300MΩ
Type of structure of the measuring end
4. The protection tube material is generally 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti
5. Product performance standards
International: IEC751-1:1983
[ Original Message ]
안녕하세요
해당제품 데이터시트 요청드립니다.
감사합니다.
회원에게만 댓글 작성 권한이 있습니다.